DC REGULATED VARIABLE POWER SUPPLY – SINGLE OUTPUT

32W -216W

  • Constant Voltage/Constant Current Operation
  • Two Digital Meters – 3 Digit DPMs
  • Phase Controlled Pre Regulation Plus Linear Post-Regulation

TEKLAB introduced DC Regulated Power Supply is designed as a Linear based Constant Current (CC) and Constant Voltage (CV)source for use in laboratories, industries and field testing. With compact size, it provides DC output voltages for Analog and Digital testing.

They provide high regulation and stability with either Digital 3-digit LED display for voltage & current is provided to read the values, the unit is equipped with coarse and fine controls for adjusting the voltage and Current.

Moreover, TEKLAB DC Regulated Power supply’s gentle and stylish look will give your lab the perfect look you deserve.

Font Panel Volt & Current Control V SET COARSE AND FINE & I SET COARSE AND FINE
Metering 3 digit DPMs for voltage and current measurement.
Meter Accuracy ±1 DIGIT

Constant Voltage Mode

 

REGULATION

Line: ±0.01% ±2mV for ±10% change in line voltage.

Load: ±0.01% ±2mV for load change from zero to full load.

Constant Current Mode

 

REGULATION

Line: ±0.05% ±10mA for ±10% change in line voltage.

Load: ±0.05% ±10mA for change in output voltage from 0 volts to maximum output voltage.

Ripple & Noise 1mV RMS
Output Polarity Floating w.r.t. ground.
Protection SCP/OVP/OLP/RPP/BEEP
Transient Response 100 µ sec within 10mV of set output voltage for load change from 10% to 90%.
Stability Total drift within 8 hours, after30 minutes warm-up under constant line, load and temperature. <±0.2% ±10mV in CV mode. < ±0.5% ±10mA in current mode.
Operating Temperature 0 to 50°C.
Storage Temperature -20°C to 70°C
Temp. Coefficient ±0.05%±5mVperOC after initial warm-up of 30 minutes, in voltage mode.
Cooling Internal Forced Cooling Fan
Line Voltage 230VAC±10%, Single Phase 50Hz.
Input On/Off Rocker Switch
Efficiency 94%
Custom Capability Special Voltage and Current ratings available on request